Embedded 3D Graphics Core for FPGA-based System-on-Chip Applications |
Hans Holten-Lund
|
| Abstract | This paper presents a 3D graphics accelerator core for an FPGA based system, and illustrates how to build a System-on-Chip containing a Xilinx MicroBlaze soft-core CPU and our 3D graphics accelerator core. The system is capable of running uClinux and hardware accelerated 3D graphics applications such as a VRML viewer.
The 3D graphics core is connected to a PLB 64-bit on-chip bus, and can render graphics into an on-chip tile buffer, which is later copied, using bus-master DMA transfers, to the frame-buffer in external DDR SDRAM memory. This memory is shared between the CPU, the 3D graphics core, and the video display which periodically reads from memory to display the final rendered graphics. The graphics core uses internal scratch-pad memory to reduce its external bandwidth requirement, this is achieved by implementing a tile-based rendering algorithm. Reduced external bandwidth means that the power consumption is reduced as well.
We show how an FPGA based embedded system is capable of most tasks in a single chip solution, without requiring additional CPU or graphics chips. |
| Keywords | FPGA, System-On-Chip, 3D Graphics |
| Type | Conference paper [With referee] |
| Conference | FPGAworld conference 2005 |
| Editors | Lennart Lindh and Vincent J. Mooney III |
| Year | 2005 Month September pp. 8-13 |
| Publisher | Electrum-Kista |
| Address | Stockholm, Sweden |
| ISBN / ISSN | ISSN 1404-3041 |
| Note | ISRN MDH-MRTC-188/2005-1-SE |
| Electronic version(s) | [pdf] |
| Publication link | http://www.fpgaworld.com |
| BibTeX data | [bibtex] |
| IMM Group(s) | Computer Science & Engineering |